Panel Replacement Cost - Real Local Prices, Then Your Exact Quote

Raised-panel steel

Carriage house

Modern flush

Full-view glass

LiftMaster openers

Chamberlain openers

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as$59/month*On approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Get your free estimate

Explore

Styles & brands we work with

01Raised-panel steel02Carriage house03Modern flush04Full-view glass05LiftMaster openers06Chamberlain openers

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Panel Replacement Cost in Queens?

Panel replacement in Queens typically costs between $250 and $500 per panel, including the panel itself and labor. Most homeowners pay around $350 for a standard steel panel on a single-car garage door. The final price depends on the panel material, the door brand, whether the panel is insulated, and how quickly you need the work done.

At Doyle Garage Doors Queens, we put the price in writing before any work starts, so you know the exact number before a single bolt comes off your door. No verbal estimates. No invoice surprises at the end.

Panel Replacement Cost Breakdown (2026)

Here’s what panel replacement pricing looks like across Queens right now, broken down by what you’re actually paying for:

These ranges reflect what we see across Queens neighborhoods including Astoria, Flushing, Jamaica, Forest Hills, Bayside, and the Rockaways. If you’re replacing a panel on a double-car door, the panel itself may be wider, which pushes the price toward the higher end of the range.

What moves the price up or down? Material is the biggest factor. A basic uninsulated steel panel costs less than an insulated panel with a factory-applied finish. Brand matters too. Panels for Clopay, Amarr, and Wayne Dalton doors are usually easier to source, while certain Craftsman or older Raynor models may need a special order, which adds a week or two and sometimes $50 to $100 to the total. The good news: panel replacement almost always costs less than a full door replacement, which runs $700 to $2,200 in Queens depending on size and material.

What Affects Panel Replacement Pricing in Queens

A few things move the price of a panel replacement up or down. Here’s what we look at when we quote a job:

• Panel material and insulation. Uninsulated steel is the most affordable. Insulated panels run $100 to $150 more per panel, but they make a real difference in attached garages, especially in Queens winters when January temperatures hover near freezing and an uninsulated door bleeds heat into the driveway.
• Door brand and panel availability. LiftMaster, Chamberlain, and Genie are opener brands, but for panels we work most with Clopay, Amarr, Wayne Dalton, and Raynor doors. Some older models have discontinued panel styles, which means sourcing a matching panel takes longer and costs more.
• Panel size and door width. Single-car doors typically use 8 to 9 foot wide panels. Double-car doors use 16 foot panels, which cost proportionally more. The price difference is usually $100 to $200 for the larger panel.
• Section location on the door. The bottom panel often has more reinforcement and a weather seal channel built in. Replacing the bottom section can cost slightly more than a middle section because of the rubber seal replacement involved.
• Color matching and finish. If your door is a standard white or almond, panels are usually in stock. Custom colors like dark bronze, forest green, or a wood-grain finish require a factory order, which adds 1 to 3 weeks and $50 to $150 to the panel cost.
• Age and condition of the existing door. If the door is more than 15 years old, the hinges, rollers, and track may also be worn. While the panel itself is $250 to $500, we’ll flag any adjacent components that look like they’re on their way out, so you don’t pay for a second service call later. We won’t push replacement parts you don’t need, but we’ll tell you what we see.

How to Save on Panel Replacement

Replacing one panel is almost always cheaper than replacing the entire door. That’s the first savings. Here are a few more ways Queens homeowners keep panel replacement costs down without cutting corners:

• Act fast when a panel is damaged. A dented or cracked panel stresses the rest of the door. The longer you run a door with one bad panel, the more wear you put on the hinges, rollers, and opener motor. What starts as a $300 panel replacement can become a $700 full door replacement if you wait too long.
• Match your existing door, don’t upgrade. If your current door is uninsulated steel and you don’t have an attached garage, stick with uninsulated. You’ll save $100 to $150 per panel and won’t notice a difference in an unheated detached garage.
• Replace only the damaged section. You don’t have to replace all four or five panels on the door. If one panel is dented or rusted and the rest are fine, we replace just that section. The labor is the same, but you only buy one panel instead of five.
• Ask about our written price guarantee. Before any work starts, we hand you the full price in writing. That means you can compare it against the quote from any other Queens garage door company, apples to apples. Free estimates are part of how we work. Call (585) 440-5777 and we’ll tell you exactly what your panel replacement will cost, over the phone or in person.

FAQs – Panel Replacement Cost

Is it cheaper to replace a panel or replace the whole garage door?

Replacing one panel costs $250 to $500, while a full door replacement runs $700 to $2,200 in Queens. If only one or two panels are damaged, panel replacement is the far cheaper option. If your door is over 20 years old or has rust on multiple sections, a full replacement may make more sense. The technicians at Doyle Garage Doors Queens can give you a straight answer on site, with both prices in writing before you decide. Call (585) 440-5777 for a free estimate.

How much does a garage door panel replacement cost in Queens?

A single garage door panel replacement in Queens costs $250 to $500 for most standard steel doors. Insulated panels, custom colors, and larger double-car door panels land at the higher end of that range. We quote the full price up front, labor included, so the number we hand you is the number you pay.

Can you replace just one panel, or do I need to replace the whole door?

In most cases, you can replace just one panel and keep the rest of the door. We match the panel to your existing door’s brand, color, and panel pattern. As long as the door structure and adjacent sections are in good shape, single panel replacement is a perfectly durable repair. If the damage goes deeper than the panel itself, we’ll show you what we’re seeing and recommend the least expensive option that actually fixes the problem.

How long does panel replacement take?

Standard panel replacement takes 1 to 2 hours for most in-stock panels. Special-order colors or discontinued panel styles can take 1 to 3 weeks for the panel to arrive, but the on-site work is still done in one visit. When you call (585) 440-5777, we can usually tell you the same day whether the panel you need is in stock.

Do you match the color and style of my existing garage door?

Yes. We match the panel to your existing door by brand, panel pattern, and color. For standard white, almond, and common neutral tones, we almost always have the panel ready to go. For custom factory colors or wood-grain finishes, we place a factory order and install it the moment it arrives. Either way, you get the exact written price before we order anything.

Does panel replacement come with a guarantee?

Every panel replacement from Doyle Garage Doors Queens includes our 365-Day Done Right Promise, in writing, at no extra charge. If the repair fails within 365 days from the date of repair, we come back and make it right at no charge. That includes a free second visit, automatically covered, no argument required.

Call for a Free Estimate on Panel Replacement in Queens

If you have a dented, rusted, or cracked panel on your garage door, call (585) 440-5777 and we’ll give you a written quote before any work begins. Our technicians are background-checked and identity-verified under the Threshold Standard. Before we arrive, you’ll receive the name and photo of the technician who’s coming to your door, so there are no surprises. We answer calls 24/7, day, night, weekends, and holidays, and a real person always picks up. We service all major brands including Clopay, Amarr, Wayne Dalton, Raynor, and more. The phone call is free, and the estimate is free too.

If you’d like to learn more about our panel replacement service, see our Panel Replacement in Queens page. You can also return to our home page for a full overview of our garage door repair and installation services.

Pricing reflects the Queens market as of 2026. Doyle Garage Doors Queens offers free estimates – call (585) 440-5777.